Airport installation modular AHUs with KRUGER fan VFD max 800 tons

EK keeps looking for valuable distributors and partners around international markets…

Airport installation modular AHUs with KRUGER fan VFD max 800 tons

PUFOAM insulation thickness :30/50mm

External sheet : 0.5 mm preplasticized steel standard , 1 mm is optional
Internal sheet : 0.5 mm Galvanised steel standard , 1 mm is optional

Aluminum frame
Base height : 50 mm /80 mm

Sections : Mixing section,Prefilter section,Medium filter section ,HEPA Filter section ,Cooling coil section,Heating coil section , Wet film humidifier / Elec trode humidifier / steam humidifier / HP Atomizing humidifier /Electric heater humidifier section ,Electric heater section , Fan section ,Diffusion section ,muffler section

Heat recovery wheel section , Plate heat recovery section ,Access door section

Mixing section: Return air damper ,Fresh air damper

Prefilter : Nylon ,panel G3/G4 ,Bag G3/G4
Medium filter : F5,F6,F7,F8
HEPA Filter :H10,H11,H13
Pressure swich & gauge are optional

Access door section : light & window are optinal

Cooling coil : Row 2 3 4 5 6 8 10 12; Aluminum fins : 11 12 13 14 15 16 FPI
Heating coil : Row 1 2 3 4 ; Aluminum fins : 11 12 13 14 15 16 FPI
Drain Pan :Zinc Painting Steel;SS304 is optional
Hydrophilic Aluminum fins is optional

Supply fan :Yilida/Kruger , backward/forward centrifugal type standard , plug fan is optional

Motor : ABB,SIEMENS,Chinese Brand, variable frequency motor is optional

TEFC/IP55/F TEFC/IP54/F

VFD & start cabinet are optional

Controller : Optional

Mixing Box

Note:
■ The width and height for mixing boxes listed above are for units with a 30mm-thick panel. For units with a 50mm-thick panel, the
parameters need a 40mm increase.
■ Standard mixing boxes are equipped with manually-divided multi-leaf hermetic air valves. Electric air valves are also available for auto
control. Air valves are made from zinc-galvanized plates or aluminum alloy with an optional flange.
■ A1 x B1 represents the windward area of return air valve; A2 x B2 represents the windward area of fresh air valve.
■ For total return air, the wind speed at the return air valve is 5~6 m/s; for total fresh air, the wind speed at the fresh air valve is no
larger than 9m/s.
■ The unit height (H) does not include the height of its base.

Specifciations

Note:
■ This table only lists some typical models among many models for quick model selection.
■ Total fan pressures listed above are tested on standard fans with rated air flow.
■ External residual pressure = Total fan pressure - Internal resistance. For internal resistance of EKDM units.

EUROKLIMAT (EK) was established in 1963 in Italy. For the past half a century, it has become famous as an energy-saving air-conditioning manufacturer in Italy and globally. Continuous innovation, new product development and top manufacturing quality are the driving force behind this growth.

EUROKLIMAT (EK) pursues the ideals of protecting the environment, providing physical comfort and adopting energy-saving into the whole process of product R&D, manufacturing and service. Our products covering residential, commercial and close control air-conditioner are manufactured according to the global generally accepted standards.