Goyen Type 2" Inlet 1-1/2" Outlet Flanged Pneumatic Pulse Valve for Dust Collector Systerm

Goyen Type 2'' Inlet 1-1/2'' Outlet Flanged Pneumatic Pulse Valve for Dust Collector Systerm

Goyen Type Flanged dust collector pulse valve with diecast aluminum alloy body, wiedely used in baghouse . Baghouse are the most versatile dust collector style and can be used in all applications. Baghouse collectors with traditional bag filters are preferred for applications with larger or mixed range of dust particle sizes, heavier dust loading, fibrous/sticky dusts or higher temperatures (normally up to 550F, in some cases up to 750F with specialty fabrics).

The working principle :The high-pressure gas enters from the air inlet and enters the lower air chamber.
1. When the pulse valve is not powered, the gas enters the decompression chamber through the constant-pressure pipe on the upper and lower shells and the throttle hole therein. Because the valve plug blocks the pressure relief hole under the action of the spring, the gas will not be discharged. Make the pressure in the decompression chamber and the lower air chamber consistent, and under the action of the spring, the diaphragm will block the injection port, and the gas will not burst out.
2. When the pulse valve is energized, the valve core is lifted up by the electromagnetic force, the pressure relief hole is opened, and the gas is ejected. Due to the role of the orifice of the constant pressure pipe, the throughput of the pressure relief hole is greater than The flow velocity of the pressure pipe gas makes the pressure in the decompression chamber lower than the pressure in the lower chamber. The gas in the lower chamber lifts the diaphragm, opens the blowing port, and performs gas blowing.

Technical Data of CA45FS Flanged Valve:

Main Dimension of CA45FS double diaphragm pulse valve:

Details About CA45F​S Electromagentic Pulse Valve:

Construction of CA45FS:

Body: Diecast aluminum
Ferrule: 305 SS
Armature: 430FR SS
Seals: Nirtrile or FKM
Spring: 304 SS
Screws: 302 or 304 SS
Outlet Slide Seal: EPDM or FKM
Diaphragm Seat: PA-66(standard). FKM coated mild steel

Connection Surface of CA45FS Diaphragm Pulse Valve:

INSTALLATION of CA45FS AC220V AC110V AC24V DC24V Solenoid Pulse Valve:

1. Prepare inlet flanges and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet flange and blowtube to valves with all seals in place. Tighten flange bolts to 10Nm (7.4 ft–lbs) Ensure blowtube is pushed all the way into the valve outlet.
5. Tanks and pipes must be independently supported from valve.
6. Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only).
7. Apply moderate pressure to system and check for installation leaks.
8. Fully pressurise system.
9. Test fire and listen for proper actuation and crisp pulse noise.Valve is not a structural component. Do not rely on valve to retain tanks or pipe. Where used, refer to product specification for installation details.

Welcome to your any question and inquiry!

* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years.   * We have served customers from Europe, North America, Middle east, Southeast Asian by designing and manufacturing for their automation fluid control applications, related to industries of pneumatic automation equipment, food beverage dispenser, agricultural irrigation, printing and dyeing, dust collector, home appliance, automobile, textile, refrigeration, etc.

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on