2-1/2" CA62MM Dust Collector MM Series Manifold Mount Pulse Valve For Reverse Jet Baghouse Dust Extraction System

2-1/2'' CA62MM Dust Collector MM Series Manifold Mount Pulse Valve for Reverse Jet Baghouse Dust Extraction System

This is high performance solenoid pulse valve for pulsing large volumes of air into filter bags for particulate removal.
Valve Body made by diecast aluminum alloy.Durable and safety. Other material can be customized, like Waterproof material, Anti-corrosive material. These series are high-flow pilot valves, pilot valve enclosures and bulkhead fittings that have been specially designed for use in dust collector systems.

Youtube Video About 2-1/2'' Submerged Pulse Valve:

Specification:

Special voltages and special specifications, please contant us.

Overall Dimension:

Details About CA62MM Electromagentic Solenoid Pulse Valve:

Construction:

Body and Dreeser Nuts: Aluminum (diecast)
Ferrule: 305 Stainless Steel
Armature: 430FR Stainless Steel
Diaphragm and Seals: Nitrile or FKM
Spring: 304 Stainless Steel
Screws: 302 or 304 Stainless steel
Outlet Pipe: Schedule 40 wrought steel zinc passivated
Diaphragm Seat: PA-66 (25 & 40MM standard), Nitrile-coated mild steel (76MM standard), Acetal (102MM standard) or Vitoncoated mild steel

Troubleshooting of Dust Collector System :

Pressure Loss

Pulse Valve Does not Open

1.Increase pulse duration setting
2.Check output voltage and amps meet solenoid requirements
3.Replace with correct pins.
4.inspect and replace/repair.
5.Replace with appropriate size pneumatic tube
6. Relocate pilot valves closer to diaphragm valves and shorten pilot lines.
7.Inspect and replace fittings.

Pulse Valve Does Not Close

1. Inspect and replace with pilot repair kit
2. Ensure that the installation is not affected by stray magnetic fields, replace solenoid
3. Check controller. Reprogram or replace.
4. Replace pilot line.
5. Reconnect
6. Inspect and replace with diaphragm repair kit
7. Inspect and ensure bleed paths are clear

Diaphragm spring failures

1. Replace manifold system with higher volume manifolds to ensure residual pressure is 70% of pre-pulse pressure, OR shorten pulse duration
2. Reduce pipe lengths or increase pipe diameters.
3. Ensure any valves inline with the pulse valves are fully open or removed entirely.
4. Replace manifold system with higher volume manifolds to ensure residual pressure is 70% of pre-pulse pressure. Increase the diameter of connecting pipes to minimum 1.5 x the nominal pulse valve outlet size
5. Clean manifold system, clear bleed paths.
6. Introduce a small restriction to the valve outlet, to assist in developing some backpressure at the valve outlet.
7. Where relevant, replace nitrile diaphragms with the Shockwave molded diaphragm equivalent.

Repair Kits of CA62MM Solenoid Pulse Valve:

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change

√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years.   * We have served customers from Europe, North America, Middle east, Southeast Asian by designing and manufacturing for their automation fluid control applications, related to industries of pneumatic automation equipment, food beverage dispenser, agricultural irrigation, printing and dyeing, dust collector, home appliance, automobile, textile, refrigeration, etc.

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on